Model Paint Stand With Changeable Weight Cartridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and quick to print paint stand that works with standard poster tack. Weight cartridge allows you to customize it.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Will not need any supports but the threads are decently fine so it is best to print it at 0.2mm layer heights or less to make sure that you get good thread definition.
Once printed the plug can be filled with any form of weight you like, I personally use pennies but I made the hole the right size to fit the diameter of a U.S. nickle. I also hot glue the weights in there so they cannot rattle around. If I want to change up the weight I can just print a spare plug and weight it differently.
To use just get some poster tack and stick it to the top of the stand. Then stick your model to that and paint away.