TrimUI Model S Pocket Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A super slim, but super durable case for the TrimUI Model S (aka Powkiddy A66) handheld emulator
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple protective case for the TrimUI Model S (also known as the Powkiddy A66). It features a secure latch with an opposing “thumb tab” to help with opening, and a charge-thru cutout so you can charge the handheld while it's in the case. The charging LED is visible while charging as well.
This case can use a 2mm-diameter pin or a piece of filament for the hinge. It is recommended to put a piece of adhesive felt or tape on the inside to protect the screen from scratches.
This case adds minimal bulk to the A66, adding only 2mm of thickness in all directions, keeping it just as portable as ever!