Used double edge razor disposal box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wife compatible razor disposal container. Store your used razors with style!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I wanted to print a razor disposal box, but my wife would reject all the model i found on the internet.
This is solution to that problem. Simple design that will hold years worth of used razor blades and is presentable enough to pass the wife test. The photos doesn't do the Prusa Marble Gray filament justice, try it yourself and you will see it fits in any white decor bathroom.
I tried to shake the razors out of the box without success. But there is nothing keeping the blades in the box other than that the opening is small. Tape over the hole with duct tape ( or other strong adhesive ) before you throw away the box full of blades.
How to print
Default prusa slicer profiles for PLA worked great on this print. The box is “print in place” my old prusa MK3 had no problem to print the internal overhangs but your mileage may vary. The specimen in photos was printed with 0.3mm layer height as i don't mind the look of bigger layers. I encourage you to try smaller layer height to get a better surface finish.