Used double edge razor disposal box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.50 – €12.83 net (excluding VAT)
For file: RazorBowl_0.3mm_PLA_MK3S_9h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.66 excluding VAT (range midpoint).
- Weight reported by the author
- 194 g
- Print time reported by the author
- 9.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wife compatible razor disposal container. Store your used razors with style!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
I wanted to print a razor disposal box, but my wife would reject all the model i found on the internet.
This is solution to that problem. Simple design that will hold years worth of used razor blades and is presentable enough to pass the wife test. The photos doesn't do the Prusa Marble Gray filament justice, try it yourself and you will see it fits in any white decor bathroom.
I tried to shake the razors out of the box without success. But there is nothing keeping the blades in the box other than that the opening is small. Tape over the hole with duct tape ( or other strong adhesive ) before you throw away the box full of blades.
How to print
Default prusa slicer profiles for PLA worked great on this print. The box is “print in place” my old prusa MK3 had no problem to print the internal overhangs but your mileage may vary. The specimen in photos was printed with 0.3mm layer height as i don't mind the look of bigger layers. I encourage you to try smaller layer height to get a better surface finish.