1 / 2
Tool and Nozzle Holder for Prusa Original Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds tools and nozzles on the Prusa Original Enclosure.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 170
- Wydruki
- 12
- Wyświetlenia
- 821
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 12) (Komentarze: 13)Remiksy (0)Kolekcje (56)Powiązane
Add more tools within easy access. This holder supports Nextruder or V6 nozzles, hotend wrenches, screwdriver, hex keys, glue stick, brass brush, pliers, etc.
Installation instructions
To mount the Tool Holder you will need the following fasteners:
- M3x8 screw (2x)
Print instructions
You have two options:
- Use the pre-sliced G-code
- Slice it and use the following settings**:
- Print settings: 0.30mm DRAFT
- Filament: PETG
- Infill: 15% grid
- Supports: I used organic support just for the glue stick area, but it may not be required.
** Note that print settings are recommended, but you can experiment with your own.