Spanner/Wrench Carrier 04 (14-19mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spanner/wrench set carrier for the range from 14 to 19mm, in 1mm size increments.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
My spanner collection inside my portable toolbox was always a mess. Each spanner dispersed in the toolbox box and hard to find. My solution to the spanner mess is to bring them together into this 3D printed spanner carrier.
This 3D spanner design is a derivation of my previous spanner carrier design, taylored for a different spanner set. This spanner set ranges from 14 to 19mm, in 1mm size increments.
The spanner carrier is in two parts. The divider section holds the spanners in place, each spanner with its own slot. The second part is a clasp that fits over the divider clipping into position and keeps the spanners in the divider from falling out. The clasp is essential when storing the spanner carrier in the tool box.
The spanner carrier had to be solid and tough. This 3D print is made in PETG with 100% infill and works well in it's task.
These spanners are a Bunnings Warehouse (Australia) own brand. This brand is good enough for general use, only.
Here is my 3D design. My design may match your needs, too.
My print is made in PETG 1.75mm Aurarum black filament, with 0.2mm layer height and 100% infill on a PRUSA I3 MK3S printer.
I hope you can find this design useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.