1 / 4
Prusa (Lack) Enclosure v2 - print on Prusa Mini (no gluing) — zdjęcie 1
1 / 4

Prusa (Lack) Enclosure v2 - print on Prusa Mini (no gluing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Prusa (Lack) Enclosure V2 to be printable on Prusa Mini/Mini+ without gluing parts.

Ocena
5 / 5
Polubienia
150
Pobrania
599
Wydruki
16
Wyświetlenia
6415
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is mix of print files from https://www.prusaprinters.org/prints/23923-lack-enclosure-v2-modified-to-print-on-the-mini and https://www.prusaprinters.org/prints/3673-mmu2s-enclosure to print Ikea lack enclosure on prusa mini without gluing parts.

As in original update for prusa mini this does not include all files that are related to MK3 printer with MMU2S.

Some of 3mf files are using latests features in prusa slicer such as paint on supports (generally modified to have less supports).

Only modified parts are middle parts of top frame (rear_middle.3mf, left_right_middle.3mf). These are changed to respect the design and use screws instead of gluing. Anything else can be printed on prusa mini (even the top rear corner parts).

To build this enclosure follow the original guide https://blog.prusaprinters.org/mmu2s-printer-enclosure_30215/. You will only need 4 more M3×30 and one more M3x10 screws.

Tagi