1 / 3
3Dlabprint Stearman PT-17 Kaydet – tunning, accesories
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have printed the aircraft and found several things to be improved on https://3dlabprint.com/shop/stearman-pt-17-kaydet
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 2043
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (25)Powiązane
- I have used the LEOPARD LC3536-6T 1270KV motor, back mount. Unfortunately, there is no cooling of it. There is no air flow around the motor. So, I have created a new motor mount with air holes and printed it from ABS - it allows a better cooling and a better cable organization.
- The mounting of wing struts using 1mm pins is a nightmare. I even can not imagine to do it regularly on a flying place. So, I have modified it for a M2 screws usage. There are bigger holes in supports and struts plus nut inserts on struts. 16 nuts and screws (inbus 8 – 10 mm length) are used. Do not panic about some mirrored descriptions on struts - it was easier to mirror struts from one side to the second one than make them again on the green grass…
- The last part is a hanger – it protects the wing in case of an aircraft hanging under a ceiling.
There are stl and gcode files attached.
Enjoy!
