1 / 7
Turris MOX fan upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model is made for 40x10mm Fan, I've used Noctua 40mm 12V and connected directly to MOX board +12V and GND using 3pin-to-2pin adapter. Also used low noise adaptor.
How to insert: use cutout to pass table through.
final position, with “cable management”
connecting to main board
temperature difference
| in °C | before | after |
|---|---|---|
| d0032004mdiomii01-mdio-1 | 70 | 52 |
| socinternalregsd0000000mdio32004switch12mdio14-mdio-e | 20 | 25 |
| socinternalregsd0000000mdio32004switch12mdio12-mdio-c | 20 | 25 |
| ath10k_hwmon-pci-0300 | 51 | 42 |
| socinternalregsd0000000mdio32004switch12mdio13-mdio-d | 20 | 25 |
| socinternalregsd0000000mdio32004switch12mdio11-mdio-b | 20 | 25 |
rest of the temperatures are same +/- 1 °C,
seem like it's working, as the temperature has spread from main board to rest of modules