LED Strip Light Channel Corner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a corner piece for LED strip lights that use the aluminum channel, allowing the lights to face inward.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 234
- Wydruki
- 2
- Wyświetlenia
- 1825
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is a corner for LED strip lights that use the aluminum channel. They make corners to turn the LEDs in the flat position, but I could not find anything that would turn the corner into itself. This is useful if you want to go around the inside frame of a window, garage door or even a room to create accent lighting.
I am using this for my year-round Christmas lights on my garage.
I made two versions; one has cutouts to allow more visibility of LED's that may be under the corner. Both versions allow for a gentle turn of the LED strip within the corner and will work with the IP65 lights that have the silicon covering.
I have now added two traditional corners for use in the flat position as well as an outside corner. It can snap over a mounted track. one has a rounded top and the over is flat topped. I found the flat top printed a little better, especially when used on a textured build plate.
It was designed to work with this type of track:
I found that printing the models lying flat and using supports worked best.