1 / 3
Drill Template to mount ATV rim to Quantum Edge Wheelchair Motor — zdjęcie 1
1 / 3

Drill Template to mount ATV rim to Quantum Edge Wheelchair Motor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D prints to mount ATV wheel to a wheelchair motor for a remote control mower.

Ocena
0 / 5
Polubienia
9
Pobrania
21
Wydruki
0
Wyświetlenia
716
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The purpose of this model is to provide a drill template to mount a ATV rim to a Quantum Edge 2.0/3.0 Motor

 

The Wheel Chair Motor

The Quantuam Edge motors come fitted with a 5 stud hub which is great for mounting a wheel.

 

 

The ATV Rim

The rim is 95mm wide designed to fit a 3.5" or 88mm wide tyre. Note the wider 110mm rims will fit but don't have enough clearance with a tyre fitted.

 

The Models

There are two stl files. 

  • A test fit that has 5 x 9mm holes for the Quantum lugs and 3 studs for the ATV rim
  • A drill template that has 3mm holes instead of the 9mm

The idea is you use the 9mm version to test your model and ATV/Motor setup and then use the 3mm version to drill the holes in the rim. Note the 3 studs that fit into the ATV rim are designed to be a very tight fit. Make sure the model is pushed all the way down to the rim.

To drill the holes

  • use a hole punch
  • drill a pilot hole. I left the model in place and drilled through the model
  • drill 9mm holes

 

 

Tyres

I fitted a Kenda 13x5.00-6 K359. It clears the motor body with about 2mm. I will probably add a spacer to the 5 bolts on the hub to increase the clearance.

 

Using OpenSCAD 

The model is created in OpenSCAD although stl files are also included so you may not need to load the OpenSCAD file. If you do:

  • download OpenSCAD  https://openscad.org/downloads.html
  • open the  .scad file  
  • make any changes you need
  • Use F5 to preview the model or via the menu Design/Preview 
  • Once you are happy with the model use F6 to Render the model or via the menu Design/Render 
  • Use F7 to Export the STL or via the menu File/Export/STL

You can find shortcuts for preview, render and STL on the menu bar 

 


 

Tagi