Dummy 13 Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had to make one before someone else did...lol
- Ocena
- 4,706 / 5
- Polubienia
- 1526
- Pobrania
- 5757
- Wydruki
- 21
- Wyświetlenia
- 35 530
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I found out about the awesome Dummy 13 designed by soozafone, I had to print one or two and then I realised they NEEDED a Lighsaber. Used the staff from the original to make it.
This is at 200% so you'll need to scale down for the original size. I printed my Dummy 13 at 200%.
There is a Full Saber file which is the purple one in the photo and then I made a hilt and blade seperate so people can print the blade in Vase Mode and glue together which is how the blue one was printed.
I just changed colour at set layer heights. Make sure you use a brim.