1 / 2
Dummy 13 Lightsaber
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Had to make one before someone else did...lol
- Rating
- 4.706 / 5
- Likes
- 1,526
- Downloads
- 5,757
- Makes
- 21
- Views
- 35,530
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When I found out about the awesome Dummy 13 designed by soozafone, I had to print one or two and then I realised they NEEDED a Lighsaber. Used the staff from the original to make it.
This is at 200% so you'll need to scale down for the original size. I printed my Dummy 13 at 200%.
There is a Full Saber file which is the purple one in the photo and then I made a hilt and blade seperate so people can print the blade in Vase Mode and glue together which is how the blue one was printed.
I just changed colour at set layer heights. Make sure you use a brim.