Digital Height Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed frame for converting a cheap digital caliper into a precise height gauge.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 116
- Wydruki
- 2
- Wyświetlenia
- 820
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printed frame for converting a cheap digital caliper into a precise height gauge. It can be operated standing upright and lying flat.
See:
You can measure:
- the extension of the router bit on your router table
- the distance between fence and router bit
- the extension of your circular saw blade
- distances with the still usable caliper jaws
- etc
The caliper used is a digital "Carbon Fiber Composites Digital Caliper" for around 5€.
You find it on amazon, aliexpress, etc. Other calipers very likely fit too, but I cannot guarantee for that.
The caliper is glued into the frame with a double sided tape. Assembly time: 5min.
Credits:
The idea is rather old. See e.g. https://www.thingiverse.com/thing:4243056 and https://www.thingiverse.com/thing:4603876 and others.
Category: DIY