2022 Christmas Gift to all Christmas tree with motion sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Christmas tree with motion sensor - ATtiny402, But you can make it without the controller as well. Just with a few parts
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
I Made this in April of 2022
Christmas tree with motion sensor - ATtiny402, But you can make it without the controller as well. Just with a few parts. For the full build you can go to:
https://www.shermluge.com/electronics/attiny-202402/attiny402-christmas-tree-with-motion
BUT you don't need to build it the way I did. You can just use the PIR with an N Channel Mosfet for Transistor and light up all LED's at once, just put the LED's in Parallel with resistors, on lower voltage. At higher voltage (which the PIR is capable of) you could put them in 2 strands in series.