Sovol Sv04 Fan ducts for 5015 24v fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of fan ducts for both the left and right extruders on the sv04 for 5015 24v fans.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
These have the same internal geometry but have different screw hole positions for them to line up with the nozzle.
This does not decrease your mirror or copy print space
The right fan duct needs to have 2x spacers printed but the left does not.
I used m3 screws to attach them to the preexisting mounting plate.
2x 8mm (can be a bit longer) *used on the left duct
2x 25mm *used on both fans
2x nuts (optional This holds onto the fan screw which isn’t too important)
2x 20mm (which was re used from the original fan mounts) *used on right side
I printed them in petg for heat resistance, but someone said that with some aluminum tape on pla they might survive.
did a cfd sim for shits and giggles
