Air filter for Kingroon KLP1 启庞KLP1空气过滤模块空气净化器
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An air filter designed for Kingroon KLP1 printer. It can also be used for painting filtration or room air filtration
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 1985
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
本模型为启庞KLP1适用的活性炭空气净化模块,同时也适用于很多其他打印机以及常规的桌面使用。需要用的到的材料有:100*100*50mm蜂窝活性炭(这在淘宝网通常可以成箱购买,价格低廉)、7530涡轮风扇、M3热熔螺母*3、M3*5螺丝*3、M3*40螺丝*2、M3螺母*2以及一个移动电源盒。
Some harmful particles could be released during the printing process, especially with fiber-reinforced materials or ABS. So I designed this filter especially for my printer. The thickness of this device is 70mm, I believe it is also applicable to many other printers.
There are several important things for you to know before you print this:
- It is recommended to use black or other dark filament, otherwise the activated carbon could make everything look messy
- The fan is a 7530 fan, it is needed to use two pairs of M3 or M4*40 screws and nuts
- The size of the honeycomb activated carbon is 100L*100W*50H in mm
- You can also use the middle layer of any surgical mask to enhance the capability of the filtration (as shown in the picture)
- The lid could be made by laser cutting so I uploaded a dxf file. But it is recommended to stick a limit block to support the carbon
- You can use 3mm diameter magnets or M3 injection molded nuts(insert nut for plastic) to hold the lid to the body. Of course, you can also use self-tapping screws for convenience
- You can use a solderless 18650 battery case to make this device portable(as shown in the picture). The spacing was designed to be 22mm at the top side