1 / 1
4-inch to Dual 2.5-inch Dust Collector Hose Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model for a 4-inch to dual 2.5-inch dust collector hose adapter.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 338
- Wydruki
- 1
- Wyświetlenia
- 1113
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (91)Powiązane
This model is for a 4-inch to dual 2.5-inch dust collector hose adapter. Dust collector hoses slide over the ends of the adapter and require hose clamps to secure. I used this for my router table. One 2.5" hose went to the fence near the router bit and the second went to the compartment below where the router resides.