Gridfinity baseplate and bins for Ikea Nordli drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bins made specifically for the half height Ikea Nordli drawers
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 178
- Wydruki
- 4
- Wyświetlenia
- 1212
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created nicely and snug fitting Gridfinity baseplates and bins for Ikea Nordli drawers.
This design is specific for the 11cm high drawers. I am thinking of creating a system for the 22cm drawers as well, but I need to come up with a solution so that the Gridfinity baseplates can be easily taken out of the drawers.
My drawers are fitted with Komplement drawer mats and I wanted to make use of the full height of the drawer. So I created a set of nice and snug fitting baseplates and a series of bins that fill the whole drawer. The bins are half the height of the drawer. The top drawers have a bar which prevents the use of 2 layers, but every second drawer can be fully stacked with 2 layers of bins.
If you need any specific size of bins I didn't provide, please let me know. I will try and create them for you.
I sliced the baseplates and bins with 25% grid infill. This is quite a lot, but the bins didn't print well on the Prusa MK4 with input shaping using just 15% infill. Feel free to try different settings and please share your findings.