Remix of wasyl00 Quest 3 table tennis adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1), Widen the blade vertically by 10mm. 2), Thin out the blade to 5.8 mm.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1121
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 12.12.23 - Add model A.1 and B.1, requested by a fellow, which adds 10mm of vertical space but maintains the same thickness as the original version.
----------------
I did this remix for 3 reasons. First, I want more space on the blade to give my fingers a wider range of motion. Second, I want to move the center of weight a little higher to get the feel of a read racket. Lastly, I want to put real table tennis rubbers on it, but keep the thickness of a real racket.
To fulfill my purposes, I made 2 changes from the original model.
1), Widen the blade vertically by 10mm.
2), Thin out the blade to 5.8 mm.
I also include rubber patterns for each model that you can use as a template for cutting rubbers.
For me, it enhances the IRL feel and allows me to practice techniques that require a wide range of finger movement. If you want more space but don't want to put rubbers on it, you can use the A.1 or B.1 model which adds 10mm of vertical space but maintains the same thickness as the original version.
I'd like to thank wasyl00 for opening up the playground for me to try things without starting from scratch!