Modular Toy Robot Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Following on from my first toy robot arm This one is a bit more modular and can be used as a toy, desk lamp,…
- Ocena
- 4,462 / 5
- Polubienia
- 592
- Pobrania
- 2315
- Wydruki
- 10
- Wyświetlenia
- 15 817
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Following on from my first toy robot arm
This one is a bit more modular and can be used as a toy, desk lamp, microphone or camera stand via swappable add-on components. The gearbox code has also been fully reworked.
More components to come.
Print at 0.2mm layer height and ensure there is a 1-layer gap in the ring gears after slicing. Use a sharp edge to de-laminate the 1-layer gaps (listen for the "crack"). Turn the knob just a little to get the gears moving, working back and forth gently. A final tap with a rubber mallet should free everything up. Then apply petroleum jelly or lubricant of choice to gears.
Category: Mechanical Toys