Modular Toy Robot Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Following on from my first toy robot arm This one is a bit more modular and can be used as a toy, desk lamp,…
- Rating
- 4.462 / 5
- Likes
- 592
- Downloads
- 2,315
- Makes
- 10
- Views
- 15,817
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Following on from my first toy robot arm
This one is a bit more modular and can be used as a toy, desk lamp, microphone or camera stand via swappable add-on components. The gearbox code has also been fully reworked.
More components to come.
Print at 0.2mm layer height and ensure there is a 1-layer gap in the ring gears after slicing. Use a sharp edge to de-laminate the 1-layer gaps (listen for the "crack"). Turn the knob just a little to get the gears moving, working back and forth gently. A final tap with a rubber mallet should free everything up. Then apply petroleum jelly or lubricant of choice to gears.
Category: Mechanical Toys