1 / 2
Replacement Arm for "Metal Toilet Paper Holder Stand Matte Black - Hearth & Hand with Magnolia" — zdjęcie 1
1 / 2

Replacement Arm for "Metal Toilet Paper Holder Stand Matte Black - Hearth & Hand with Magnolia"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Did the arm on your Hearth & Hand toilet paper holder break off? Use this to replace it!

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After years of use, the arm on my toilet paper holder, from Target, broke off at the pivot point.

Instead of buying a new one, I just got measurements from the original piece and fabricated a replacement arm. 

Overall, this arm is 171mm long x 30mm wide x 30mm tall.

At 0.2mm layer height (plus tree supports), this is only about 18g of basic PLA.

(Use something stronger than PLA, as it does have to bear some static weight and PLA ends up stretching. I used PLA for proof of concept/testing.)

Infill: cubic at 30% infill density.

Tagi