1 / 2
Replacement Arm for "Metal Toilet Paper Holder Stand Matte Black - Hearth & Hand with Magnolia"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Did the arm on your Hearth & Hand toilet paper holder break off? Use this to replace it!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After years of use, the arm on my toilet paper holder, from Target, broke off at the pivot point.
Instead of buying a new one, I just got measurements from the original piece and fabricated a replacement arm.
Overall, this arm is 171mm long x 30mm wide x 30mm tall.
At 0.2mm layer height (plus tree supports), this is only about 18g of basic PLA.
(Use something stronger than PLA, as it does have to bear some static weight and PLA ends up stretching. I used PLA for proof of concept/testing.)
Infill: cubic at 30% infill density.