1 / 2
PC Case Fan cover 5.25" for 14cm fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan holder to put in four 5.25 slots in the front of old PC case to create an airflow (you will need a mesh)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Fan holder to put in four 5.25 slots in the front of old PC case to create an airflow
You probably should add a mesh between the main part and the ring to protect the fan from inquisitive fingers (I used superglue to put everything together)
Printed in Petg, 0.4 Nozzle, 0.2 mm layer
