Sim racing rumble motor and wind simlator control box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Control box to drive up to four rumble motors and two wind simulator fans.
- Ocena
- 0 / 5
- Polubienia
- 11
- Wydruki
- 0
- Wyświetlenia
- 1382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
I came up with this control box design to connect up to 4 rumble motors and 2 fans with SimHub. I opted to use 4-pin fan cable extensions to connect rumble motors and fans.
The hardware bill of materials:
- 1x Arduino UNO R3 (preferably original one to avoid driver issues with Windows 11+)
- 1x Adafruit Motorshield v2
- A bunch of 4-pin fan extension cables
- 1x DC Power Jack 5.5 X 2.1mm
- 1x Power supply depending on your rumble motor or fan selection - I chose this 9V2A to connect 4 XBOX 360 controller rumble motors (no fan). Remember to unplug the jumper from the motor shield. If you also want to connect fans, make sure to match the rumble motor and fan motor voltages and get a big enough power supply.
Pedal Rumble Motor Mounts
Depending on your pedals and rumble motor selection, you need different mounts.
Here are some directions - but make sure they fit the rumble motors you got. I went with the XBOX 360 controller rumble motors.
| Pedal Type | Rumble Motor Type | Motor outer diameter [mm] |
| Heusinkveld Sprint | XBOX 360 Controller (Left) | 26 |
| Thrustmaster T3PA Pro XBox 360 Dual Rumble Motor Mount | XBOX 360 Controller (Left) | 26 |
| Thrustmaster T3PA (single motor) | XBOX 360 Controller (Left) | 26 |
| Thrustmaster T3PA | 27 | |
| Heusinkveld Ultimate+ | XBOX 360 Controller (Left) | 26 |
| Heusinkveld Ultimate | ||
| Asetek Invicta | ||
| Asetek La Prima | XBOX 360 Controller (Left) | 26 |
| Asetek Invicta | ||
| VRS DFP | XBOX 360 Controller (Left) | 26 |
| Fanatec CSL | ||
| Fanatec CSL | RK370 | 24.4 |
| Fanatec CSL | XBOX 360 Controller (Left) | 26 |
| Fanatec CSL Elite V1 | PlayStation 4 Controller | |
| Fanatec CSL Elite V1 | GameCube Controller | |
| Fanatec Clubsport | ||
| Simagic P2000 | ||
| Logitech G25, G27, G29, G920 | 24 | |
| Logitech G25, G27, G29, G920 | 24 | |
| Ruito Pedal |
Wind Simulators
There are a bunch of wind simulator designs available. Find my design here. I can recommend the Noctua NF-A14 - but be aware that the voltage is incompatible with most rumble motors.