TRX-4M Body Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
These Trx 4m body risers allow larger tires to avoid body rub without jacking up the suspension. Since bumpers are the body mounts, the bumpers are still aligned with the body. The rear bumper needs some modification to get working, although I am using an injora aluminum bumper. Regarding the stock bumpers, I am unsure if they will work without modification. I am also using an after-market frame, but the stock frame should still work fine. Extra hardware is needed to get this mounted, however. I use just regular PLA, but you can choose your own material. I also just use stock settings, although I do recommend using a more fine layer height like 0.10 or 0.07.