1 / 9
Simple phone aiming platform (Copy of Matthias Wandel's Design) — zdjęcie 1
1 / 9

Simple phone aiming platform (Copy of Matthias Wandel's Design)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple titling platform for phones or cameras

Ocena
5 / 5
Polubienia
4
Pobrania
25
Wydruki
2
Wyświetlenia
165
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Public Domain

This is a near identical copy of Matthias Wandel's Design found here.

 

I added a smartphone holder that interfaces with the existing dowels.

The plastic on plastic interface ended up being more slippery than wood on wood. I opted to use a strip of open-cell weather stripping to add friction. But I think placing a piece of cloth between the halves or sanding the surfaces would work also.

If you print large flat sides down there is no need for supports. I printed the dowels vertical with brims.

Tagi