CompuCleaner Original 2 Electric Air Duster Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fine nozzle for Compu Cleaner blower
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 192
- Wydruki
- 4
- Wyświetlenia
- 1120
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I find compressed air cans a nuisance and a waste. After less than 15 minutes, the can is empty. There are alternative products on the market. The electric Compu Cleaner blower is a good choice. It delivers compressed air under good pressure.
When you want to get into tight cavities or crevices, a long and thin nozzle is desirable. Here is my 3D design to get one such nozzle. The nozzle incorporates an overflow path for air that can't get out of the main open, just like the standard nozzle.
The IT Dust Busters web page is www.itdusters.com. It's available on Amazon Au with an Australian power plug for AU$89 (including delivery) from here:
https://www.amazon.com.au/Dusters-CompuCleaner-Original-Electric-Duster/dp/B073F9NY1X
My print is made in PETG 1.75mm Aurarum black filament, with 0.2mm layer height and 100% infill on a PRUSA I3 MK3S printer.
I hope you can find this design useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.