Miniature Painting Cap for Redgrass Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Painting caps that should fit the redgrass handle. Intended to use with minis that aren't on bases yet.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 811
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Greetings all. I needed some more caps to use with my handle and opted to make a design where I didn't have to have a mini on a base to attach while also hopefully saving on some filament. It has been particularly helpful for getting the undersides of minis that a base may block. Even modeled on some knurling around the base of the cap to help turn it.
So far I've made a few different size variations. If there's interest I may make additional sizes and types. Like one with just a flat bottom rather than the thin ribs currently in place. There's also some variants utilizing magnets and pegs to hold the top part on.
Current sizes: 34mm (magnet), 40mm (magnet), 56mm
Depending on your printer's dimensional accuracy you may need to ream the center hold a bit with a drill bit.
Printed on a Prusa MK3S+
Material: PLA (Prusament, Jessie's Filament, Overture PLA+)
Layer Height: 0.2