BOSCH GFF 22A L-Boxx insert for Lamellos
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some simple boxes to keep the differnt size biscuits 0/10/20 organized in the L-Boxx 238 / size 3.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 728
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The original inlay of the Bosch GFF 22A gives basically no space to neatly add some biscuits.
In this version, the recess part for the tool of the original inlay is cut out and the remaining space can be filled with boxes for the three mainly used lamellos of size 0, 10 and 20.
The fit should be tight and flush with the lid cover to avoid any mess during transport.
Walls are 2.3mm thick. I printed them with a 0.6mm nozzle in three passes and 0.35mm layer height in PETG. All overhangs are 45° maximum and should be able to print w/o supports.
In total quite a lot of filament is needed, but the well-arranged, space saving solution is definitively worth it.