Hex bit extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extends a hex bit for a drill or screwdriver
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 186
- Wydruki
- 2
- Wyświetlenia
- 590
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
In a pinch I needed a really narrow hex bit extender which would fit a small hole. Designed this to be basically as narrow as possible. When I printed it it cracked when I put the hex bit in, but ultimately held its shape and enabled me to screw the screw I was trying to tighten. So useful in a pinch but probably not a reliable long-term tool.
Measures approx 68mm long, with the extension part approx 58mm. Diameter is 8.4mm.
I recommend printing it tall and upside down (ie the part that goes into the screwdriver or drill facing down) - it'll take longer and you'll need brims but this'll ensure there aren't any supports in the parts that need to fit/a good tolerance.