1 / 3
Dust cover for B&W Zeppelin - removal of docking arm — zdjęcie 1
1 / 3

Dust cover for B&W Zeppelin - removal of docking arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover for the hole at the base, due to removal of 30pin connector docking arm for Bowers and Wilkens Zeppelin Air.

Ocena
0 / 5
Polubienia
6
Pobrania
117
Wydruki
0
Wyświetlenia
886
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

For some time I wanted to remove the docking arm of my Bowers and Wilkens Zeppelin Air, because I am not using the old 30pin connector for Ipods. Instead of that I am using Apple Airplay or the AUX connector. 
If you remove the arm, you should cover up the hole at the bottom to avoid dust. 
For this reason i designed the model.

Here you will find the instructions for removing the docking arm:
https://de.ifixit.com/Anleitung/Removing+Bowers+and+Wilkins+Zeppelin+Air+Dock+Arm/14783

Printing Instructions:

 

  • I used PLA, but PETG should be good to
  • 0.3 Layer height
  • No supports needed
  • 15-20% Infill is enough

Tagi