Dust cover for B&W Zeppelin - removal of docking arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for the hole at the base, due to removal of 30pin connector docking arm for Bowers and Wilkens Zeppelin Air.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 117
- Makes
- 0
- Views
- 886
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
For some time I wanted to remove the docking arm of my Bowers and Wilkens Zeppelin Air, because I am not using the old 30pin connector for Ipods. Instead of that I am using Apple Airplay or the AUX connector.
If you remove the arm, you should cover up the hole at the bottom to avoid dust.
For this reason i designed the model.
Here you will find the instructions for removing the docking arm:
https://de.ifixit.com/Anleitung/Removing+Bowers+and+Wilkins+Zeppelin+Air+Dock+Arm/14783
Printing Instructions:
- I used PLA, but PETG should be good to
- 0.3 Layer height
- No supports needed
- 15-20% Infill is enough