Airvape Legacy "Airbubble" Pod Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed replacement for the plastic pod holder for airvape screw-on pods.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution
The airvape legacy pods came with a paper case that quickly deteriorated so I designed this holder to keep all the pods in a compact container. Designed for screw-on pods, untested with the updated press fit pods but since they work for the same device they're probably the same thickness. Made versions for 6 pods and 10 pods (had 2 sets and lost a couple along the way), solidworks files are included in case you want a different number of pods. I like to put unused pods facing one way and the used facing the other to keep track. Flat bottom face to prevent the case from rolling around
Print Settings:
Printed on my Voron Trident with a 0.8mm nozzle
Infill doesn't matter much, only the bottom corners should be infill.
No support for the case
Support on build plate only for the holder, I used a single organic support on the handle
Print orientations are bad, sorry. Print the holder with the flat face down,