Airvape Legacy "Airbubble" Pod Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed replacement for the plastic pod holder for airvape screw-on pods.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 38
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution
The airvape legacy pods came with a paper case that quickly deteriorated so I designed this holder to keep all the pods in a compact container. Designed for screw-on pods, untested with the updated press fit pods but since they work for the same device they're probably the same thickness. Made versions for 6 pods and 10 pods (had 2 sets and lost a couple along the way), solidworks files are included in case you want a different number of pods. I like to put unused pods facing one way and the used facing the other to keep track. Flat bottom face to prevent the case from rolling around
Print Settings:
Printed on my Voron Trident with a 0.8mm nozzle
Infill doesn't matter much, only the bottom corners should be infill.
No support for the case
Support on build plate only for the holder, I used a single organic support on the handle
Print orientations are bad, sorry. Print the holder with the flat face down,