Desiccant box for Plastic House cereal box lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small desiccant box that fits in the Plastic House cereal box lid opening
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 147
- Wydruki
- 4
- Wyświetlenia
- 1489
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
This is a desiccant box that fits snugly inside the opening in a Plastic House cereal box container. It pairs nicely with my filament & hygrometer insert.
It is a pretty tight fit, so make sure to be careful when removing the box from the cereal box lid if you've got it full of desiccant!
If you like this, please consider clicking the ❤ button. I'd love to see your makes, too - please upload photo(s) if you're able - thanks so much!
Important!!!
Please note that the model has a solid base. You must follow the printing guidelines below to set solid layers to 0 and customize the infill to the pattern you want. It's the “infill" that generates the cross hatch pattern in the print!
Printing
- 0.4mm nozzle
- 0 solid bottom layers
- 0 solid top layers
- Infill: 20% rectilinear has worked well for me
- I've only printed these with PLA so far, but I assume other materials would work equally well
Revisions
November 4, 2023
- Initial version