LED Front Plate for Voron MANTIS 5015 Toolhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A neat-looking front plate for the "MANTIS dual 5015" toolhead.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 1244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The Mantis Dual 5015 is a fantastic toolhead with very low weight and insanely powerful part cooling.
I made a front plate for it that clamps onto the hotend cooling fan from above and below. This neatly covers its screws, giving the whole thing a very clean look.
This project is inspired by the AIO Mantis - which sadly seems dead and only provides a broken STEP file which I couldn't get to open. So I took the idea and re-created it from scratch, adding a bunch of changes.
I incorporated a very basic LED bay, allowing me to glue in two Neopixel Sequins for RGB-controllable nozzle lighting. Gluing other types of LED in place should be possible too. Perhaps I'll add a more sophisticated slot in the future, but for now this is working very well for me. The bottom of the clamp has a slot for a cable binder, providing some basic strain relief for the cabling.
This version is designed to work with the Mantis' long air ducts (for Rapido, Crazy Volcano & similar hotends). I have not tested its fit with the shorter duct versions - it might be slightly too long for those. This is still a work in progress, once I am satisfied I finalized the design I will add versions to work with any of the available lengths of air duct. Feel free to message me if you can't wait :)