Primer Tube Hanger for Dillon Case Feed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 483
- Wydruki
- 4
- Wyświetlenia
- 1245
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be press-fit into the hanger slots which seemed unnecessary.
I designed this version so the pick-up end of the tube would just drop into the slots yet it's very secure once it's in.
I also added a sixth slot so you can put a space between the full and empty tubes since a lot of people have 5 tubes.
This should also fit a little better and doesn't stick out unnecessarily far. It's also designed and oriented to print without supports.
I designed this to fit the Dillon small primer tubes that are about 8mm in diameter with the pick-up end at about 10mm and haven't tested it to fit anything else so ymmv.
All my models are free — if you want to support the filament habit, send me a small tip here.
Filament: