Primer Tube Hanger for Dillon Case Feed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be…
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 483
- Makes
- 4
- Views
- 1,247
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be press-fit into the hanger slots which seemed unnecessary.
I designed this version so the pick-up end of the tube would just drop into the slots yet it's very secure once it's in.
I also added a sixth slot so you can put a space between the full and empty tubes since a lot of people have 5 tubes.
This should also fit a little better and doesn't stick out unnecessarily far. It's also designed and oriented to print without supports.
I designed this to fit the Dillon small primer tubes that are about 8mm in diameter with the pick-up end at about 10mm and haven't tested it to fit anything else so ymmv.
All my models are free — if you want to support the filament habit, send me a small tip here.
Filament: