IKEA Shoe Cabinet Drawer Guide/Stopper Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,48 € – 0,58 € netto (bez VAT)
Dla pliku: IkeaShoeCabinetDrawerPlug_0.2mm_PETG_MK3S_40m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,53 € netto (środek widełek).
- Masa podana przez autora
- 4 g
- Czas druku podany przez autora
- 40,2 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Replacement for the Guide/Stopper plug of (older) IKEA shoe cabinets, such as Hemnes and others.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I bought and old IKEA shoe cabinet (probably an old version of the Hemnes cabinet) to remodel it into custom one that better fits into the room. While the cabinet was in a good general shape, many of the little plastic plug that guides the drawers were worn out and the drawers were a bit loose.
So I decided to model a reinforced replacement with a broader flange that I could screw into the cabinet to give the drawer a stable guild. I used 3.5x18mm wood screws to secure the new plug.
I decided to add the bolt that goes into the pre-drilled hole in the cabinet, so that I do not need to think about finding the right position, although it means that I need to print with support (or alternatively, print in two parts that need to be glued together).
For my print, I have chosen PETG, as it more flexible than PLA. PLA would probably also work, but I have not tested it. It is important to use enough perimeters to ensure the strength of the part. I printed with 5 perimeters and even more for the flange part (see the attached .mf3 file). I used organic-style supports, which I find more easy to remove than the normal support structures. Layer height does not matter too much, my prints are with 0.20mm.
Note that more recent IKEA shoe cabinets use a different kind of plug (IKEA Part 116713), which is secured with a screw. I believe that my model works as well with these cabinets, but I have not checked. In any case, you might want to check out this model as well: https://www.printables.com/model/176081-ikea-hemnes-shoe-rack-guide-plug
Just in case you need to replace the hinge as well, have a look at the following model: https://www.printables.com/model/252130-ikea-hemnes-shoe-cabinet-drawer-hinge