clippable skadis T clip system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple clippable solution for skadis T clip system, support and hook files.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 1130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple system base on the T clip by @LineArcLine for my tools.
i printed them with PLA+, 40% gyroid infil and 0.12 layer height for around 10g of filament, no support required (small bridge on the support can print themselve without support)
you can get the fusion 360 files in the download to edit the model however you want.
in the photo you can see the test i did with weight (4kg and 2kg) to see if it would resist, i don't think it would be a good idea to support more than 1.5/2kg max per hook (you can see little to no deformation in the 2kg test as compared to the 4kg one that seem to be on the limit of breaking, after 24h on the board).
As you can see in the photos, i did use another model before this one (use the hook from that model as a base from here : https://www.printables.com/fr/model/384671-cordless-drillhilti-skadis-mount )