Prusa mini adjustable legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable support legs with no freeplay for Prusa Mini 3d printer.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 159
- Wydruki
- 3
- Wyświetlenia
- 1617
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I plan to use 4 of these legs for my prusa mini to support its frame. And some Z axis support, which is not finished yet. To mount and properly align my printer on some board.
I saw many designs and in the end I tried to make my own model just for fun. Its my 1st model ever so pls be tolerant. :-)
These legs allow to adjust height of printer. And mount the printer to some desk. It is possible to set the freeplay of thread. M3 x 16mm screw and M3 nut needed.
To mount the leg to prusa mini frame you need 2 M3 screws and 2 M3 T-nuts.
I havent tried to mount this legs to my printer yet. It is possible that it will need some modifications. But it looks quite decent. So I decided to share it.