1 / 1
SRA Solder Flux Holder with Swab Compartment
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a little holder I designed to hold the flux and some swabs instead of having them lay around on my table.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SRA Solder Flux Holder with Swab Compartment. Printed in PETG. I'm sure PLA would work fine. This holder is specific to the SRA flux paste container. I made the swab compartment taller than what's in the picture.