Router Table Dust Collection (Mark II) - Magnetic table attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust collection for router table fence, with magnetic attachments to fence and table.
- Ocena
- 4 / 5
- Polubienia
- 25
- Pobrania
- 127
- Wydruki
- 2
- Wyświetlenia
- 942
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this as an alternative to Rockler's router table dust collection fitting. I wanted something that could easily be removed from the fence and transition to a clamped table collector when free routing. This was also designed with the dimensions of the New Yankee Workshop Router Table plans in mind, that has a 7" wide opening for dust collection (the previous size of Rockler's fitting). Conveniently this is also the max width that my Mini+ can print!
The result: the collection hood, with 2.5" OD fitting, and a pair of magnetic bases. One base has screw holes to be mounted to your fence. Another base has a large semicircular area intended for clamping.
The magnet insets were designed to hold 5/16" round neodymium magnets (I got mine from Harbor Freight, $3/ 10 magnets). 10 magnets are used in each part for about 5-10lbs pull force.
Printing the bases is straightforward. The collector itself is a bit tricky. I turned it 90deg to reduce overhang angles, and then used organic supports to support the hose connector and overhangs. Printed with 0.8mm nozzle, 0.4mm layer height, in PETG.