Router Table Dust Collection (Mark II) - Magnetic table attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust collection for router table fence, with magnetic attachments to fence and table.
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 127
- Makes
- 2
- Views
- 942
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made this as an alternative to Rockler's router table dust collection fitting. I wanted something that could easily be removed from the fence and transition to a clamped table collector when free routing. This was also designed with the dimensions of the New Yankee Workshop Router Table plans in mind, that has a 7" wide opening for dust collection (the previous size of Rockler's fitting). Conveniently this is also the max width that my Mini+ can print!
The result: the collection hood, with 2.5" OD fitting, and a pair of magnetic bases. One base has screw holes to be mounted to your fence. Another base has a large semicircular area intended for clamping.
The magnet insets were designed to hold 5/16" round neodymium magnets (I got mine from Harbor Freight, $3/ 10 magnets). 10 magnets are used in each part for about 5-10lbs pull force.
Printing the bases is straightforward. The collector itself is a bit tricky. I turned it 90deg to reduce overhang angles, and then used organic supports to support the hose connector and overhangs. Printed with 0.8mm nozzle, 0.4mm layer height, in PETG.