1 / 8
Bahtinov astrophotography mask that works with a camera lens — zdjęcie 1
1 / 8

Bahtinov astrophotography mask that works with a camera lens

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bahtinov mask for either a telescope or a camera lens.

Ocena
3,333 / 5
Polubienia
25
Pobrania
191
Wydruki
2
Wyświetlenia
1425
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

Bahtinov mask designed for either a telescope or a camera lens.

The main difference between this and other masks I've found is that this one is designed to work on either a normal camera lens or a telescope. That means allowing a very fine mask with a lot of thin bars, including a fitting for the camera's filter threads, and having a handle that makes it easy to remove the mask without inadvertently changing focus.

The images include three photos taken through the mask to show how it works: one with focus a bit too close, one a bit too far, and one just right.

The camera mask has very thin walls in the mask (0.45mm). I had to turn on "detect thin walls" to slice it properly (using PrusaSlicer, I haven't tried any other slicers).

Included are two STL files for telescopes (a 6" Celestron and an 8" Celestron) as well as an STL that fits onto a 77mm filter thread (tested with a Nikon lens). The openSCAD code is also included. The code is set up so you can customize for any size/configuration you'd like.

Print Settings

Printer Brand:

Prusa

 

Printer: 

I3 MK3S

Rafts:

 

No

 

Supports: 

No

Resolution:

 

200

 

Infill: 

20


Filament:
PolyMaker PLA

 

 

 

 

 

Category: Camera

Tagi