Bahtinov astrophotography mask that works with a camera lens
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bahtinov mask for either a telescope or a camera lens.
- Rating
- 3.333 / 5
- Likes
- 25
- Downloads
- 191
- Makes
- 2
- Views
- 1,426
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Bahtinov mask designed for either a telescope or a camera lens.
The main difference between this and other masks I've found is that this one is designed to work on either a normal camera lens or a telescope. That means allowing a very fine mask with a lot of thin bars, including a fitting for the camera's filter threads, and having a handle that makes it easy to remove the mask without inadvertently changing focus.
The images include three photos taken through the mask to show how it works: one with focus a bit too close, one a bit too far, and one just right.
The camera mask has very thin walls in the mask (0.45mm). I had to turn on "detect thin walls" to slice it properly (using PrusaSlicer, I haven't tried any other slicers).
Included are two STL files for telescopes (a 6" Celestron and an 8" Celestron) as well as an STL that fits onto a 77mm filter thread (tested with a Nikon lens). The openSCAD code is also included. The code is set up so you can customize for any size/configuration you'd like.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
PolyMaker PLA
Category: Camera