Simple hanger no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, neat and durable hanger. Can be sticked or screwed down. Clean print, no supports needed.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 112
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Just a simple, neat and durable hanger which can be sticked to the wall with double-sided tape or screwed down if preffered.
I was looking for simple, easy to print towel hanger and because nothing convinced me, I decided to make my own.
I printed it with PETG, but PLA will work as well. I recommend turning ironing ON to get that pure top surface. If you care about Z-seam, it is good to set its position on left or right edge of the hook, so it will become less visible.
I used these settings for PETG:
0,4mm nozzle
Layer height: 0,2mm
Wall line count: 5
Top&bottom layers: 3
Infill - cubic: 30%
Print speed: 80mm/s - infill; 40mm/s - walls/top/bottom;
Ironing: ON
With these, print time is around 40mins
Feel free to adjust for your own needs