Simple hanger no supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple, neat and durable hanger. Can be sticked or screwed down. Clean print, no supports needed.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 47
- Makes
- 1
- Views
- 112
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Just a simple, neat and durable hanger which can be sticked to the wall with double-sided tape or screwed down if preffered.
I was looking for simple, easy to print towel hanger and because nothing convinced me, I decided to make my own.
I printed it with PETG, but PLA will work as well. I recommend turning ironing ON to get that pure top surface. If you care about Z-seam, it is good to set its position on left or right edge of the hook, so it will become less visible.
I used these settings for PETG:
0,4mm nozzle
Layer height: 0,2mm
Wall line count: 5
Top&bottom layers: 3
Infill - cubic: 30%
Print speed: 80mm/s - infill; 40mm/s - walls/top/bottom;
Ironing: ON
With these, print time is around 40mins
Feel free to adjust for your own needs